Sealife Sportdiver Pro 2500 Set

The Sealife SportDiver Pro 2500 set brings together the fantastic SportDiver iPhone camera housing with the Sea Dragon 2500 video/photo light in one great package.

This is the perfect set-up for those who want to instantly get better results from their photos when using the housing.

The SportDiver housing works with all iPhones from 7 upwards and is simple to use featuring a dual alarm system that warns you if you have a leak which combined with the waterproof nature of many recent iPhone models makes it a safe bet to use with your phone! It also has a dedicated red filter for colour correction under the water.

If you need extra protection for the LCD display we offer a dedicated screen shield.

The set also includes the 2500 Lumen “Sea Dragon” Photo-Video Light for perfect underwater images and video and is comes with a grip and tray for smooth, steady imaging.

Sealife SportDiver Underwater Housing – Compatibility

The Sealife SportDiver Underwater Housing for iPhone is compatible with the following models: iPhone 7, 7 Plus, 8, 8 Plus, X, Xr, Xs, Xs Max, 11, 11 Pro Max, SE (2nd Gen), 12, 12 Mini, 12 Pro and 12 Pro Max models.

Included in the package:

• Protective hard case
• Vacuum pressure pump
• Set of AAA batteries
• Moisture muncher
• Silicone grease lube
• Underwater correction filter
• O-ring removal tool
• Lanyard with a BCD clip
• Spare set of o-rings and
• Rubber grip tabs

Features

SportDiver Housing

• Depth rated to 40 meters so great for recreational divers
• Connects housing and iPhone via Bluetooth
• Multiple shooting options via a dedicated free App
• Compatibility with Sealife Sea Dragon Lighting and Sealife Flex Connect systems
• Long battery life up to 50h, powered by easily accessible AAA batteries
• Compatible with most current iPhones

Sea Dragon 2500

• Powerful 2500 lumen LED light using the latest COB LED array technology
• One button control for easy operation – one button to power light on/off and select brightness
• Three brightness levels: 100%, 50% and 25%
• Hidden emergency signal mode: 1-second blink interval and SOS Morse code
• 60 minute burn time at full power and constant brightness
• Depth rated to 200 feet/60 meters – Guaranteed
• Easy to expand with Flex-Connect™ trays, grips and Flex Arms, handle, Y-S, ball joint, cold shoe and other accessories
• Quick-release button to detach light and aim in crevices and hard to reach areas
• 120° wide beam angle evenly illuminates the subject with no hot spots
• Corrosion-proof metal light head for heat dispersion and durability
• Removable 25W Li-Ion battery w/ charger and international plug adapters included
• Waterproof battery compartment – even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics
• Universal mounting screw fits SeaLife and other brands of underwater cameras w/ standard ¼-20 tripod mount

Specifications

Body Material	Anodised aluminium light head with a fibre-reinforced polycarbonate body
Light Source/Bulb Type	1 x Vero 18 COB LED array (COB – Chip On Board)
Brightness	2500 lumens (maintains 2500 lumens throughout burn time at full power)
Effective Range	4 ft/1.2 m (depends on camera model and visibility)
Brightness Levels	Full power (100%), half power (50%), and quarter power (25%)
Button Control	Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle]
Light Modes	Constant light or hidden emergency signal light (activated by long push of power button)
Colour Temperature	5000K
Colour Rendering Index*	90
Beam Angle	120 degrees
Battery	Lithium-ion 7.4V, 3400 mAh, 25Wh (included)
Battery Charge Time	170 minutes
Run Time	60 minutes at full power/120 minutes at half power/240 minutes at quarter power
Depth	Tested to 200 feet/60 meters
Dimensions	4.8″ x 2.2″ x 3.8″ (12.2cm x 5.6cm x 9.7cm), head only
Weight	13.1 ounces (371 grams), head only
Bulb Life	35,000 hours
O-ring	Dual NBR o-rings (lube included)
Buoyancy	Negative

*CRI is a measure of a light source’s ability to show object colours “realistically” or “naturally” compared to daylight, which has a CRI of 100 and represents the maximum value.

Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach a temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reach 150F (65C) degrees. Immediately turn off the light if any parts of the light become hot to the touch.